|
|
|
Thank
you for your interest in our wood sculpting and carving tools.
|
|
|
 |
Sanding
Flap Wheels
Sanding Flap Wheels are available for both 1/8" and 1/4"
shanks and are rated to 25,000 rpm for use on Dremel and Makita
type die grinders (GEO 600 model). They are great for smoothing
out the "fuzz" that sometimes occurs when wet wood is
worked with a die grinder using any type of burr. I also use these
wheels to sand the surface of suiseki stands (daiza). All 1/8"
wheels are indicated by the letter e. The FW 1-E is available in
coarse, medium and fine grit. |
|
Pictured:
FW-1, FW-2, FW-1-E, FW-2-E, FW-3-E,
FW-4-E
|
|
BuzzOut
Wheels
Large
BuzzOut wheels. Adapter shank required. Heavy duty roto saws,
similar to the RS-2, are available in a 2" diameter in
four widths, 1/4"(#302), 3/8"(#306), 1/2"(#310)
and 3/4"(#314). They thread onto a 1/4" shaft that
fits the Makita type die grinder. The teeth on these wheels
are the most aggressive of all the tools at removing wood fast
with no loss of control. The shafts are available in a short
style 1-3/4", (#840).
Pictured:
#314 3/4"x2" #310 1/2"x2"
#306 3/8"x2" #302 1/4"x2"
|
|
|
 |
Right Angle
Drive for your Dremel.
This accessory, RAD 421, attaches to Dremel models, 275, 285,
395, 3950, 595 and many Dremel clones. It allows a superior freedom
of movement, similar to a painter's brush stroke. With a roto
saw burr attached, the ease of movement enhances one's ability
to create natural curves and hollow trunks. Contact us if your
roto tool is not mentioned by number. RAD 420 fits some older
models.
Pictured:
#420 (gray) and #421 (black).
|
|
Carving
Blades
These blades attach to an Exacto type handle and simplify
an assortment of cuts. A similar set imported from Japan costs more
than $100. At $17 for the four blades and the handle, it is an
excellent bargain. |
|
|
 |
Saw Blades
The saw blades, 400S and 400V are both very thin blades. The 400V
is uniquely shaped and can be used to remove wood quickly by dragging
the blade horizontal to the shaft. The 400S makes cutting off
large branches easy, dead or alive, while the 400V can be used
to sculpt shari, jin and uro (hollow trunks).
Vaned (above)
Straight (below) Adapter sold separately.
|
|
|
Reference
Materials:
|
|
|
|
Click
here to go to the 1/4" Burrs Page.
|
 |
|
Click
here to go to the 1/8" Burrs Page.
|
|
|
